Our service area is North East England and the control centre dispatches work to the nearest engineer to keep travelling time to a minimum.

Customer Service Managers are always available for advice or assistance and staff are usually on the road in the area. Customer service is always our first consideration and we will not undertake 'problem' jobs or work we can't manage with total confidence in our expertise.

A good job well done leaves a satisfied customer who will use our services again.

We are the premier service in our area and our customers demand and receive the best service - consequently our services are always in demand with customers frequently requesting repeat calls by their original service engineer.

Electrical Mains Installation Testing & Emergency Lighting Testing

Periodic Inspection and Testing is offered in accordance with BS7671 (as amended). This means, in effect, that most systems require certifying every five years. In practical terms and to aid budget management, many of our customers now opt for a 100% visual inspection and 20% test of their installation every year.

Our Test Engineers

Senior Test Engineers are required to hold a City & Guilds 2360 (Parts I & II) certificate, or equivalent, at 16th Edition level of the IEE Wiring Regulations, together with a more advanced qualification, usually a City & Guilds 2391 (Inspection & Testing) Certificate.

Emergency Lighting

Emergency Lighting is inspected and tested in accordance with the requirements of the 16th Edition IEE Wiring Regulations and BS 5266 Part 1, 1988. The Test Certificate issued is the standard Emergency Lighting Test Certificate.

Repairs/Remedial Work

Each of our companies operates a separate, independently-managed Division to undertake remedial work. Duty engineers can be contacted 24-hours / 7 days-a-week.

Costs

Cost estimates are usually prepared for each individual site and will reflect the number of circuits to be tested, the availability of circuit data and the proportion of circuits to be tested outside normal office hours.

Where a large testing requirement exists, we will be able to agree an 'all-hours' rate per circuit to help with budgeting and planning. Should a customer have a large number of separate, smaller sites, testing costs are then based upon an agreed fee. Preliminary estimates can be obtained by clicking onto Booking Visits & Requesting Quotations.

Electrical Engineering Services

0845 226 3610